Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: PetterJhon on June 24, 2019, 08:48:54 am
-
Hello everyone,,,
I'm using an ATIK 314L+ with a SBIG CFW10 and guiding with a guider tube and a lodestar
I want to use an OAG but I'm not sure if is possible to attach the ATIK OAG to the filter wheel that use a T2 thread
Can somebody help me?
Thanks
-
Same Problem With Me Could any one help please. (https://eurot20slamleagues.com)
-
Hello,
This would require the Atik OAG to be mounted to the SBIG filter wheel using the 3 mounting hole in the body of the OAG. These would require drilling tapping of the FW front plate. So not really recommended.
Best regards
Vince