Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: susan-parker on February 09, 2020, 06:20:24 pm

Title: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: susan-parker on February 09, 2020, 06:20:24 pm
Wanted one of these, but aparently not available unless one messes around with multiple fittings, so made my own.
The EFW2.2 mount leaves a 1mm gap at the back with a Horizon, however there is still 2mm backfocus to hand.

Title: Re: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: susan-parker on February 09, 2020, 06:22:38 pm
Still in the infinite zone :)
Title: Re: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: susan-parker on February 09, 2020, 06:23:25 pm
All nice and snug, but it fits :)
Title: Re: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: susan-parker on February 09, 2020, 06:24:18 pm
Overall setup.
Title: Re: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: vince on February 11, 2020, 11:48:48 am
Hi Susan,

Glad you got it all together, the M54 adaptor you made looks good.

Vince
Title: Re: M54 to M54 adapter with 3mm sholder for mounting SpaceCat onto Atik OAG/FW...
Post by: susan-parker on February 11, 2020, 01:27:24 pm
Hi Vince,

Thanks :)

Now I just need to give the insides a nice coat of matt-black paint.

Best,
Susan.