Atik Cameras

Author Topic: verticla Stripes in my pics  (Read 2545 times)


  • Newbie
  • *
  • Posts: 0
verticla Stripes in my pics
« on: January 29, 2017, 09:49:16 AM »
from time to time I find vertical stripes in the pics of my 11002m as shown in the appendix? (I don't mean the colum error)???

I selected a temperatur of -20C (Outside temperature was -10C) and all pictures are showing in the fits header a actual temperature of exactly -20.00000C.
Is this possible?
Or might it be, that the cooler failed but the camera shows  credible values?

I'm using MaxIm DL 6.13 and control my 11002  via ASCOM 6.13.2 - ATIK Camera2 and the 11002 driver

Maybe someone hs an idea. :-\

CS (with working cameras  8) )


  • Newbie
  • *
  • Posts: 2
Re: verticla Stripes in my pics
« Reply #1 on: July 21, 2017, 01:49:10 PM »
My camera also developed this problem. I cannot be compensated either by bias/dark correction nor by flat fielding. This is probably some problem with voltages - I could see some dependencies on power consumption, so that stronger lines appeared when camera was strongly cooled, but it was not a rule. So far I did not find any solution for this and I suggest, if you have guarantee, send it to ATIK. Unfortunately my guarantee run out thus I live with what I have.