Atik Cameras

Author Topic: Core Software Update 5.0.0.1 March 8th 2019  (Read 84 times)

CraigG

  • Newbie
  • *
  • Posts: 36
Core Software Update 5.0.0.1 March 8th 2019
« on: March 15, 2019, 10:55:31 AM »
Anyone downloaded and used the new package including the "Dusk" software?
-Craig

Noah4x4

  • Newbie
  • *
  • Posts: 22
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #1 on: March 15, 2019, 11:09:20 PM »
Yes, at least in daylight test.

The significant improvement for me is that the revised Atik ASCOM Driver now enquires what specific camera. If you respond Atik Horizon it invites you to select Low, Medium or High Gain presets, just like in Infinity. Previously, despite the Horizon being CMOS I had been unable to alter Gain in Sequence Generator Pro. Now it works fine (and I love SG Pro autofocus and its darks in the fly).

As regards, using the driver with SharpCap, there seems to be some residual issue. It now errors when connecting to camera with a message 'unable to connect to a server' (whose server is a mystery to me). I have reported to both Atik and SharpCap Support. Suggest users of SharpCap wait a few days whilst this is resolved.

As regards Dusk, it looks very interesting to me as it appears to support my Microtouch MKIT20-WL auto-focuser.  However,,  whilst I played with a few of its features, cloud has beaten me as regards any proper test. It has the simplicity of Infinity, but if it delivers more advanced features it could be superb. However, I suggest don't rush to download it until next week. I gather that an unexpected  'bug' affecting the OSC version of  the Horizon was found late today, but it should be fixed in a day or so. 

CraigG

  • Newbie
  • *
  • Posts: 36
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #2 on: March 15, 2019, 11:32:35 PM »
Excellent report! Sounds promising on several fronts. I'm particularly interested in whether it will improve the interface with SharpCap. Thanks for the heads up on a possible bug with the Horizon OSC..I was planning on holding off a download anyway as I'm waiting for better weather to fully test my Horizon after a recent repair and didn't need another complication!

Keep us posted as you can and thanks!
-Craig

Lobotom

  • Newbie
  • *
  • Posts: 2
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #3 on: March 16, 2019, 09:56:50 AM »
Also tested Dusk (with ATIK 16200)

I have found many issues (over 20 show stoppers) and application crashed frequently. I have contacted support and provided detailed error reports. ATIK team is working on these issues. Hopefully DUSK will become usable in a while.

Currently DUSK is (for me) far away from being usable and stable for daily use.

CS
« Last Edit: March 16, 2019, 10:00:11 AM by Lobotom »

Noah4x4

  • Newbie
  • *
  • Posts: 22
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #4 on: March 16, 2019, 10:30:48 AM »
Excellent report! Sounds promising on several fronts. I'm particularly interested in whether it will improve the interface with SharpCap. Thanks for the heads up on a possible bug with the Horizon OSC..I was planning on holding off a download anyway as I'm waiting for better weather to fully test my Horizon after a recent repair and didn't need another complication!

Keep us posted as you can and thanks!
-Craig

Hi Craig,

I had the previous Atik ASCOM driver working fine with Sharpcap but with no control over my Horizon's Gain etc. However, I now do have such control in SG Pro with the new driver.

The new SharpCap issue I have encountered with the latest ASCOM driver is that the camera simply would not connect and the software  was reporting a failure to connect with some server.  I have just woken this morning and (stupid me) realised I was not connected to the Internet as  I deliberately run that NUC in isolation from the wider world and had its wireless adapter connected to my Celestron SkyPortal external WiFi accessory (hence not to Internet). However, why Sharpcap even wanted to connect to the Internet is a mystery to me. Unfortunately, I won't be able to restest until tomorrow morning and will report then. It could simply be that Sharpcap needs to (once only) download something to enable this. Will investigate further....

Noah4x4

  • Newbie
  • *
  • Posts: 22
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #5 on: March 18, 2019, 11:31:02 PM »
Now downloaded 5.0.0.3 and wish I hadn't. Spent an hour setting up wedge and polar alignment, managed to guillotine a power cable in the process; but fortunately I had another. But now I can't get my camera to work properly in Infinity or SG Pro.

CraigG

  • Newbie
  • *
  • Posts: 36
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #6 on: Today at 01:16:41 AM »
Oh man, sorry you're going through this. Any feedback from Support?

Noah4x4

  • Newbie
  • *
  • Posts: 22
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #7 on: Today at 08:08:07 AM »
I spoke to them Friday and I know they are working as fast as they can on this issue which is Horizon OSC specific. The problem is occuring with the core software download that includes Dusk. I think I can delete that, reinstall using the Core Software only (top option on the page)  and revert to the previous ASCOM drivers. I will attempt this today.

Feedback from the developer of Sharpcap has identified where the problem lies using the Sharpcap log and I have forwarded that to Atik Support.  The original problem was the driver wasn't adding Gain support to third party APPs like SG Pro/Sharpcap and for Dusk. This is only necessary for the Horizon. They fixed that, but it looks as if the driver isn't identifying if it is the mono or OSC version. Then oddly, the camera then keeps disconnecting and I noticed '"can't finder server" error messages (whatever they mean). I am sure Atik Support is on the case.
« Last Edit: Today at 08:10:16 AM by Noah4x4 »

Noah4x4

  • Newbie
  • *
  • Posts: 22
Re: Core Software Update 5.0.0.1 March 8th 2019
« Reply #8 on: Today at 05:55:49 PM »
Good news I think Craig...

I don't know what is happening with the 'Core software with Dusk', which I deleted today!

However, I have reverted to the 'Core Software without dusk' (the top download option). Now (albeit only in daytime test) the camera is working properly in Infinity and SG Pro (which it did before, but with no Gain options in SG Pro) and....it even appears to be working in Sharpcap!

In the first two you can set Gain as Low, Medium or High via Atik Camera settings. In SG Pro the ASCOM driver asks you to select camera and I chose Atik Horizon 29; Color: Gain = Low.

In SharpCap, I think we probably need to prior set Gain in Infinity and the camera will remember in SharpCap.

SharpCap now scans for cameras and gives me these options
Atik Camera
Atik Camera 2
Atik Cameras
Atik Cameras2


The plural (italics) is the two options that I had before. Select those and it now doesn't work with the Horizon OSC. I guess this is for CCDs. However select Atik Camera singular and that now works, and it now defaults to RAW16 under color where it previously offered only Mono (and where the Dusk version was erroring as it couldn't find camera etc).

It could be that this is now working in SharpCap because I had prior set Camera = Horizon 29/color/low in SG Pro in the ASCOM Driver and it is being remembered. Maybe you can try with the none Dusk version of Core Software Craig and see what happens? I will await to hear from others before downloading Dusk.