Atik Cameras

Author Topic: IC434 with Atik 383L+ Color  (Read 14778 times)

promax3d

  • Newbie
  • *
  • Posts: 3
IC434 with Atik 383L+ Color
« on: February 13, 2013, 11:39:04 am »
I would like one of your kind opinion thanks!!

satup:
scope: Vixen Visac VC200L 1200mm
guide: Orion 80 + mz5m
ccd: Atik 383L+ Color
Mount: AZ-EQ6 GT

4 shots  800 sec 2 dark
site:
Rome Italy
best regards

massimo
« Last Edit: February 13, 2013, 12:07:53 pm by promax3d »

promax3d

  • Newbie
  • *
  • Posts: 3
Re: IC434 with Atik 383L+ Color
« Reply #1 on: February 13, 2013, 11:40:36 am »
in BW

Lex

  • Full Member
  • ***
  • Posts: 244
  • We do it at night...
Re: IC434 with Atik 383L+ Color
« Reply #2 on: February 13, 2013, 08:43:33 pm »
Hi Massimo,

Everything in your image is fine, focus and colour calibration; well done!
IMHO the subs could be longer to show up more of the faint dust wall backing the horse head.
Bearing in mind the OSC chips show up more noise and need longer exposures this would clearly be a big step forward for your picture.
On the other hand you have calibrate with more darks and bias's to suppress the amount of noise..

Best and clear skies!
CGEM, C11, TS Carbon Apo Triplet 90/600, TS Carbon UNC 254/1250, Atik 383l+, EFW2,
TSOAG, Lodestar....

bwa

  • Sr. Member
  • ****
  • Posts: 298
Re: IC434 with Atik 383L+ Color
« Reply #3 on: February 14, 2013, 07:07:30 pm »
I'm not too sure what the focal ratio of your scope is?  800 sec exposures may be reasonable; however, the image appears to need more.  Maybe it is the processing resulting in the darkness?

Four subs is not normally enough to really get a good signal-to-noise ratio.  I would suggest in the order of 20+ for really good image quality.

It is a good start and you can add more subs to it as you acquire them...

promax3d

  • Newbie
  • *
  • Posts: 3
Re: IC434 with Atik 383L+ Color
« Reply #4 on: February 20, 2013, 10:14:16 am »
Thanks to all for comments and suggestions :)
best regards
Massimo