Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: sferlix on February 24, 2015, 02:05:57 pm

Title: Atik 383L+ mono, shutter problem
Post by: sferlix on February 24, 2015, 02:05:57 pm

Hello,

I guess I've a problem with the shutter.
When it is open, a small piece is stil present in front of the sensor, causing a dark shadow in my light frames.
When the shutter is closed (i.e. while taking dark frames), a small part remains uncovered.

How could I fix this issue ?
Please, have a look at the attached photos.
In Artemis, I can read the actual firmware version: Protocol 3.27


thanks

Title: Re: Atik 383L+ mono, shutter problem
Post by: niteman1946 on March 04, 2015, 05:34:17 pm

If you have not already done this, I'd suggest emailing Atik Tech Support.  My experience is you will get a timely response from them.
Marrk

Title: Re: Atik 383L+ mono, shutter problem
Post by: iksose7 on March 05, 2015, 04:31:42 pm

I also had a similar issue mentioned in this topic: http://forums.atik-cameras.com/index.php?topic=2205.0

I received a new power supply yesterday and have been running test, it seems to no longer be a problem.

Callum

Title: Re: Atik 383L+ mono, shutter problem
Post by: niteman1946 on March 05, 2015, 06:44:57 pm

Hi Callum,

Good to hear you got it resolved. 

Mark