Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: pgottstein on May 17, 2016, 05:06:59 am

Title: can't stop continuous exposure button in Maxim DL with 460 OSC
Post by: pgottstein on May 17, 2016, 05:06:59 am

I was trying to collimate my telescope with CCD inspector with maxim DL. When I try to stop continuous exposure it continous to download. I have even checked that download box while stop is not checked.  I think its a driver issue .  I am currently using attic artemis HSC driver for my camera set up in maxim.

thanks

Peter

Title: Re: can't stop continuous exposure button in Maxim DL with 460 OSC
Post by: simonlowther on June 12, 2016, 08:41:31 am

Hi Peter,

What version of Maxim are you using? I had a similar issue with the Atik One 6.0 but it seems to have resolved itself with the latest update from Maxim.

Si

Title: Re: can't stop continuous exposure button in Maxim DL with 460 OSC
Post by: Lenny on June 28, 2016, 06:45:28 pm

I'm having the same problem with my 383 in Maxim DL6, latest update. Try to find/focus and you can't stop the process short of CTRL/Alt/Del. Selected camera Driver is ASCOM

Title: Re: can't stop continuous exposure button in Maxim DL with 460 OSC
Post by: Lenny on September 06, 2016, 03:23:18 am

Found the answer...you need to put a delay between the images of at least one second. Then you can click stop.