Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Software and Everything Else => Topic started by: mr1337 on August 22, 2018, 04:32:15 am
-
Fired up the new Horizon camera (Running latest Windows 10 on Macbook Pro/Bootcamp) and I can't connecta. Keep getting "Failed to connect to camera"
I do hear the device connection sound and I can see it in device manager under USB Controllers, Manufacturer is libusb 1.0 and location is Port_#0016.Hub_#0001
I do hear something connect and disconnect several times after I plug it in though.
Any ideas on what could be happening?
-
I am running into the same connection error on a W10 notebook. I am trying to connect an Atik 314 after having installed the lastest software 4.2.2.9.
-
Sorry for the delayed reply. I'm looking into your issue and will get back to you shortly. Many thanks for your patience, Amy
-
FWIW, I rebooted and the problem magically disappeared... not sure what got caught up but the 'advanced power cycle' fixed it.
Since then I have been able to use both Nebulosity and Infinity software and as long as I fire up Artemis first to get the gain/cooling set up I can generally connect with Nebulosity (for grabbing flats etc) without an issue. I do disconnect from the camera in Nebulosity before I do anything else because it does seem different software will fight over who gets to talk to the camera ;0)