Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: CCD_Stefan on January 03, 2013, 11:50:50 am

Title: 13,8 Volts Input for the 383 ?
Post by: CCD_Stefan on January 03, 2013, 11:50:50 am

Hello,
can I use 13,8 Volts input for the ATIK 383 ?

Stefan

Title: Re: 13,8 Volts Input for the 383 ?
Post by: MikeM on January 03, 2013, 06:47:06 pm

Hi Stefan I use a Pyramid 13.8 regulated power supply for my 383 and it works great.

Title: Re: 13,8 Volts Input for the 383 ?
Post by: Frank W on January 05, 2013, 05:10:13 pm

I also use a Pyramid 13.8 volt power supply with no issues.
Frank W

Title: Re: 13,8 Volts Input for the 383 ?
Post by: andysea on January 05, 2013, 11:39:48 pm

I used to power my 383s with 13.5V. No issues.

Title: Re: 13,8 Volts Input for the 383 ?
Post by: CCD_Stefan on January 06, 2013, 04:41:16 am

Hello,
OK, thank you.

Title: Re: 13,8 Volts Input for the 383 ?
Post by: Lex on January 08, 2013, 06:29:00 pm

Confirmed,

works great under 13.8 V

Best

Title: Re: 13,8 Volts Input for the 383 ?
Post by: niteman1946 on January 25, 2013, 04:22:46 pm

Quote from: MikeM on January 03, 2013, 06:47:06 pm

Hi Stefan I use a Pyramid 13.8 regulated power supply for my 383 and it works great.

Hi Mike,

There are several versions of the Pyramid RPS.  Is the 3amp about the right size?  (i.e. Pyramid PS-3kx)?

Mark

Title: Re: 13,8 Volts Input for the 383 ?
Post by: MikeM on January 27, 2013, 08:44:31 pm

Hi Mark I use the PX-9KX which is the 5amp model..

Title: Re: 13,8 Volts Input for the 383 ?
Post by: niteman1946 on January 28, 2013, 01:55:23 am

Hi Mike, thanks for the response.

I had decided on, and ordered the PS-9kx yesterday.

Mark