Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Atik Infinity => Topic started by: Hawkula on January 02, 2017, 07:27:06 pm

Title: Exposure times not visible in the replay mode
Post by: Hawkula on January 02, 2017, 07:27:06 pm

 I have watched many videos on YouTube of people using the infinity software. When in the replay mode  the exposure times that the user used during recording are always displayed in the exposure time area.  But not on my software. Only the number 1 shows up in the exposure time area regardless of what exposure links are used in the recording process. I would really like to see that number  during replay. Is this a problem with the software – or did I install it incorrectly?

Title: Re: Exposure times not visible in the replay mode
Post by: roelb on January 03, 2017, 12:35:16 am

Check if you have a sub directory called "Settings" into the DIR where you save the recorded images.
All image data is recorded in Settings 'TXT' files into this 'Settings' DIR.
When replaying those Settings 'TXT' files are read and the number and time of sub exposures is displayed.
If you are missing these Settings TXT-files, no exposure data can be displayed.
I remember, when I started with the Infinity, that those Settings files where missing.
But I can't recall what the reason was.

Title: Re: Exposure times not visible in the replay mode
Post by: Jo on January 04, 2017, 09:42:56 am

Can I also check if you're using the latest version of the Infinity software from our downloads page?

(http://www.atik-cameras.com/downloads/ (http://www.atik-cameras.com/downloads/))

Thanks,
Jo