Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: KeithBC on January 24, 2013, 05:19:12 am
-
Hi, all. First post here.
I would like to be able to use my 383L+ and EFW2 with my Televue Paracorr. Has anyone tried this combination?
There are two problems: finding an adapter from the Paracorr's 2.4" threads to the EFW2's M54 threads, and getting the back focus distance right. The distance I can make up with threaded extension tubes. (The Paracorr's variable extension would put the sensor at least 29mm too far back, so I have to make up my own.)
Does anyone know where to find a 2.4" to M54 adapter? Thanks.
-
Keith,
I don't know if it could be of any help, but I had a similar problem to connect the EFW2 to my Tak FS60-CB f/4.3 reducer, which also needs to stay at a precise distance from the camera CCD sensor. I ended up making a connector with the help of a local lathe workshop.
Although I haven't used it yet, a well know resource is (in case you already don't know it):
http://www.preciseparts.com/ppmain/index.html
Good luck,
Luiz
-
Hi Keith,
try it here: www.teleskop-express.de (http://www.teleskop-express.de) I saw some on this wonderful site.
Otherwise you can send them an email and I am sure they will find one for your suits..
Best