Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Software and Everything Else => Topic started by: -Amenophis- on July 28, 2015, 10:25:26 pm
-
Hello everyone,
I have a little concern about my new USB Hub at D-Link:
So when I plug my camera Atik One on the Hub, the driver for my guiding camera (Atik GP) is not displayed....
And when I plug the camera directly to my computer, the driver appears
I checked the Hub is powered.
I checked all catches of unsuccessful hub.
The cable used is the one provided.
I am the GP cable that connects to the ass of Atik and the cable from the hub to the Atik.
I tried the GP connected directly on the hub ... same problem.
Thank you for your help ;)