Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Large Format => Topic started by: peter11002 on January 29, 2017, 08:49:16 am
-
Hi,
from time to time I find vertical stripes in the pics of my 11002m as shown in the appendix? (I don't mean the colum error)???
I selected a temperatur of -20°C (Outside temperature was -10°C) and all pictures are showing in the fits header a actual temperature of exactly -20.00000°C.
Is this possible?
Or might it be, that the cooler failed but the camera shows credible values?
I'm using MaxIm DL 6.13 and control my 11002 via ASCOM 6.13.2 - ATIK Camera2 and the 11002 driver 6.2.2.20532
Maybe someone hs an idea. :-\
CS (with working cameras 8) )
Peter
-
My camera also developed this problem. I cannot be compensated either by bias/dark correction nor by flat fielding. This is probably some problem with voltages - I could see some dependencies on power consumption, so that stronger lines appeared when camera was strongly cooled, but it was not a rule. So far I did not find any solution for this and I suggest, if you have guarantee, send it to ATIK. Unfortunately my guarantee run out thus I live with what I have.