Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Large Format => Topic started by: Erok on October 25, 2019, 02:54:03 pm
-
I used to be able to connect the camera using the Atik drivers, universal or the other. Now I can only connect using ascom and the temperature control and power read outs only work for a few seconds then stop responding.
I'm not sure what changed. I've tried reinstalling drivers, removing and reinstalling, etc.
Any ideas?
-
Here is a snipe of the device manager
-
Same for me. I had rolled back the drivers to get it working again. Now with a new control computer the same thing, so stuck with ascom.
When using the "Camera PlugIn 2.0" I get "No ATIK cameras found", and when I choose the Universal, I get an error 217 when trying to connect.
-
Yep, that's the same error. Anyone have a fix?
-
Hi all,
We have a new core software which includes a fix for this, I have tested it here and it is working fine now.
https://www.dropbox.com/s/mm7kdveyb87h9or/SetupAtikCamerasUniversal-5.0.3.8.exe?dl=0
Please let us know how you ge on.
Best regards
Vince
-
Thank you. Will give this a try!
-
I am only starting to learn to guide. The current TPoint model for the MyT: RMS = 8.54; PSD = 9.35, from a run of about 100 samples. Performed Accurate Polar Alignment and was excellent for both azimuth and elevation. In the past I have had and lost several models that allowed me to successfully and consistently get 600s unguided subs with good stars krogerfeedback (https://www.krogerfeedback.ltd/)