Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: patholland on June 12, 2012, 03:35:41 PM

Title: Atik 450C color conversion
Post by: patholland on June 12, 2012, 03:35:41 PM

I am still having issues with color conversion with the Atik 450C. Does anyone know the proper color conversion numbers for this camera (or chip)? Help Please....

Title: Re: Atik 450C color conversion
Post by: ruitripa on June 13, 2012, 04:40:28 PM

Hi,

Which software are you using?

Title: Re: Atik 450C color conversion
Post by: patholland on June 13, 2012, 07:24:58 PM

Maxim DL 5. I would also like to use Images Plus if I could. I use the standard RGB but colors are still off. Thanks for any help.

Title: Re: Atik 450C color conversion
Post by: ruitripa on June 15, 2012, 12:06:13 PM

Hi,

Just use RGB conversion and X and Y offset. That should work.

Title: Re: Atik 450C color conversion
Post by: patholland on June 16, 2012, 03:41:31 AM

What would the X and Y offsets be for the Atik 450C camera?

Title: Re: Atik 450C color conversion
Post by: ruitripa on June 18, 2012, 09:47:29 AM

Ahh, sorry I was referring to Maxim DL 4... Don't have access to Maxim 5 at the moment, but should be X=0, Y=1.

In any case, and since software behaves so differently, it's easy to test correct offsets. Just focus on a colorful target and experiment a bit until you get correct color. Also, note that the use of a IR block filter will help getting better color.