Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: John Van Allen on December 27, 2016, 11:46:47 AM

Title: Atik 420 acceptable voltages
Post by: John Van Allen on December 27, 2016, 11:46:47 AM

Hello,
I have just obtained an Atik 420 camera and am preparing it for use. My Losmandy G11 mount uses a Lithium Ion battery pack which I selected because of articles regarding the Gemini system which stated that 16 volts DC was better and even preferred over 12vdc.

So my question is can the Atik 420 run at 16vdc or is this too high a voltage?

Thanks
John

Title: Re: Atik 420 acceptable voltages
Post by: Andrew on January 04, 2017, 09:42:17 AM

Hello John,

16 volts is way too high for your camera

13.8 volts is the absolute maximum that we recommend

Best regards

Andrew