Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: jjpicon on November 15, 2013, 08:13:20 pm
-
Hello!
I'm using an ATIK 314L+ with a SBIG CFW10 and guiding with a guider tube and a lodestar
I want to use an OAG but I'm not sure if is possible to attach the ATIK OAG to the filter wheel that use a T2 thread
Can somebody help me?
Thanks
Juan Jose
Spain
-
Hi,
this should work with some adapters! At the bottom of the page of the following link you can see the adaptors.
http://www.teleskop-express.de/shop/product_info.php/info/p5163_Atik-Off-Axis-Guider-Deluxe-mit-umfangreichem-Zubehoer---2----M54-Anschluss.html (http://www.teleskop-express.de/shop/product_info.php/info/p5163_Atik-Off-Axis-Guider-Deluxe-mit-umfangreichem-Zubehoer---2----M54-Anschluss.html)
Hope this helps! If not ask Wolfi at TS, he will find the fitting adaptor.
Best
Lex
-
Thank you !
I'll try
Juan José