Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: smithn00 on July 18, 2015, 05:45:09 am
-
I have a new FWE2. It goes with my Atik 383L. Software was recently downloaded and installed. When power is applied the FWe2, it begins to move the filter wheel and never stops. The motor got hot so I turned it off.
What might be my problem?
-
Problem solved. Carousel was installed up-side-down.
-
Smithn00:
I have the same problem but I dont remember what side was up when I removed the disk, is the numbering supposed to be up or down when you look at mounted disk from above (I mean when you removed the cover)
anyone?
pelle
-
When you remove the cover you should see the numbers facing you