Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Titan and GP Cameras => Topic started by: -Amenophis- on August 31, 2015, 10:12:17 am

Title: Atik GP and offset on TheSky X
Post by: -Amenophis- on August 31, 2015, 10:12:17 am
Hello,

I would like input my FOV on The Sky X pro but what offset for Atik GP ?

(http://www.astrosurf.com/d_bergeron/astronomie/Bibliotheque/Traitement%20image/The%20sky%20X%20pro/fov1.jpg)

I would like to get the field of the guiding camera as shown in the image.

I have Atik One 6.0

Thank you for your help
Title: Re: Atik GP and offset on TheSky X
Post by: -Amenophis- on September 11, 2015, 03:32:28 pm
nobody ?

On "Field of view indicators" in TheSkyX pro, I put this information regarding CCD camera Atik One 6.0 :

Element N°1
Description : Atik One
Shape : Rectangle
Size : 71,62 arcminutes (X axis) 57,30 arcminutes (Y axis)
Offset : 0 and 0
Pixels : 2750 (X axis) 2200 (Y axis)

Element N°2
Description : Atik GP
Shape : Off Axis Guider
OAG PA : I don't know
Size : 27,85 arcminutes (X axis) 20,63 arcminutes (Y axis)
Offset : I don't know
Pixels : 1296 (X axis) 964 (Y axis)

Thank you for your help  ;)
Title: Re: Atik GP and offset on TheSky X
Post by: vince on September 14, 2015, 01:29:52 pm
Hi

I've had a quick look at the Sky X, I would use 0 mm by 0 mm for the offset and 0 deg for the OAG PA.

Hope this helps.

Best regards
Vince
Title: Re: Atik GP and offset on TheSky X
Post by: -Amenophis- on September 19, 2015, 10:45:44 pm
like this ?

(http://i.imgur.com/FEo9AL3.jpg)