Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Atik Infinity => Topic started by: donboysail on November 24, 2015, 04:48:50 am

Title: Some questions about the Infinity
Post by: donboysail on November 24, 2015, 04:48:50 am
1.  I notice there is no Dark frame provision in the software for the Infinity.  Does that mean it doesn't require any.  I do notice that the UltraStar does?   

2.  For any object will the exposure time for equal image results be the same for the Infinity color and Atik414 color, and if not which one will require less exposure time?

3.  Why the need for an external power supply in the Infinity?

Don
Title: Re: Some questions about the Infinity
Post by: Steve on November 24, 2015, 02:13:10 pm
Hello Don

1,  Yes for video astronomy type applications, when using the ICX825 our hot pixel algorithm is better than using dark frames.
2,  Ahh that depends.  The major differences between the two cameras are read speed and cooling.  The infinity will have a higher read noise due to its faster download speed and more thermal current due to not being cooled.   In exposures of seconds the noise associated with thermal signal is irrelevant so will not differentiate the cameras.  The read noise will be and electron or two higher in the infinity so may effect the quality in the fainter parts of an image.  It will be a relatively minor effect.  For exposures of minutes the 414 should return a better image due to its cooling.
3,  The infinity is based on a high quality microscopy camera.  This uses 12V as it offers the ability to use significantly less powerful, noisy, charge pumps to generate the higher voltages the cameras needs. 

Best
Steve