Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: jamesburgess on August 09, 2012, 01:15:00 am
-
Can anyone tell me the correct bayer pattern for the 314L+ camera , I use Deep Sky Stacker and the camera is not listed but I can use a generic pattern. Thanks
-
Can anyone tell me the correct bayer pattern for the 314L+ camera , I use Deep Sky Stacker and the camera is not listed but I can use a generic pattern. Thanks
Obviously nobody from ATIK reads these posts :/ I'd like to know why that information isnt in the manual?
-
Oh yes we do.... ;)
If you read the sticky message at to top (Forum Guideline) you can see how to get a response direct from Atik.
The reason for not giving offsets in the manual is that different software treat the images differently and need different values. Our Capture and Dawn software will recognise the images from recent cameras directly and use the correct offsets automatically.
Hope this helps
Steve
-
James
I had the same problem with the 383 and DSS.
I just tried all the different generic matrix configurations until I got the one that worked. If I remember well there are only three or four so it doesn't take long.
Andy
-
James, one more thing.
If you want to send me one of your raw subs I can debayer it with pixinsight and tell you what the matrix is.
It would be very simple for me to do so let me know.
Andy
-
Hello,
Like Steve said, different software handles this differently. A good technique is to take a daylight or indoor image of a target of well known color (use a IR block filter if the target is illuminated by the sun), and experiment with offsets until color is similar.