Atik Cameras Forum
Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: pablotwa on October 20, 2016, 11:11:38 pm
-
Hi and thank you for reading this
I have a Laptop with win 8, Latest Ascom, Latest Atik software and drivers (Uninstalled and installed several times) it's being detected in Device manager (under Universal Serial bus controllers) it shows Atik 414ex and it says it's working properly and yet it won't connect to ANY program in my Laptop The Sky X, Sequence Generator Pro or Artemis.
By the way the camera is plugged in and powered.... :-]
Thoughts?
Pablo Lewin
pablotwa@earthlink.net
-
In addition I disconnected EVERY usb device from the laptop and connected the powered camera on all USB ports to no avail. It is worth noting perhaps that every time I connect AND power the camera the Device manager UNDER serial bus controller shows Atik414ex as working and active. It's not reflected anywhere else on the device manager such as imaging devices etc. ONLY in serial bus controller ... I'm trying the Raspberry Pi way now in an act of desperation! LOL!
-
Hi Pablo,
Sorry to see you're having problems. One quick question: In device manager, if you right click the camera and select 'properties' what does it say next to manufacturer?
Chris
-
Manufacturer libusb 1.0
Location Port_#0002.Hub_#0002
Digital signer: Artemis CCD Ltd
Driver date:06/18/2013
Device USB\VID_20E7&PID_DF3D\6&7bda045&0&2 was configured.
Driver Name: oem28.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Driver Date: 06/18/2013
Driver Version: 0.0.0.0
Driver Provider: libusb 1.0
Driver Section: USB_Install
Driver Rank: 0xFF0001
Matching Device Id: USB\VID_20E7&PID_DF3D
Outranked Drivers:
Device Updated: false
Driver Management concluded the process to install driver atik_libusb_drivers.inf_amd64_7f3feed4096c2563\atik_libusb_drivers.inf for Device Instance ID USB\VID_20E7&PID_DF3D\6&7BDA045&0&2 with the following status: 0x0.
Device USB\VID_20E7&PID_DF3D\6&7bda045&0&2 was started.
Driver Name: oem28.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Service: WinUSB
Lower Filters:
Upper Filters:
There's a lot more by the way....
-
Hi Pablo,
Looks like those settings are correct. Can you check in task manager -> services to see if the 'Status' of 'ArtemisHSCService' and 'ArtemisHSCServiceMonitor' are both 'Running' (it might say 'Started' on Windows 8 )
Chris