Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: gljiva on October 26, 2012, 11:57:31 am

Title: 314EC and 383LC+/ color converting, stacking and processing
Post by: gljiva on October 26, 2012, 11:57:31 am

Hi to all, this is my first post and I start with a question: which one of the softwares you found is the best one for converting the images in to color for the cameras mentioned above on the subject?

I tried artemis RGB and to be honest I did not had good results.
Maxim dl stacking does very well but then after streching and DDP filtering again results are not very good.
DSS tried as well but things are not getting much better either.

ImagesPlus never tried before. Would be great if somebody who tried can tell few words about.

Maybe is just me doing things wrong.

Attached is one of my pictures of M27 done and processed year ago.
Still plenty of room for improvement.

Sorry for bad English.

Title: Re: 314EC and 383LC+/ color converting, stacking and processing
Post by: jsbianco on October 30, 2012, 03:28:28 pm

gljiva,

I have been using ImagesPlus for many years starting with DSLR and now Atik 383 OSC.  I use Capture to take images and then use ImagesPlus to do the processing.  Mike Insold, the author of ImagesPlus, has automated the processing and responds quickly to any questions or problems.  There is a Yahoo user group that I have used many times for help.

Joseph

Title: Re: 314EC and 383LC+/ color converting, stacking and processing
Post by: jcm on October 30, 2012, 06:24:51 pm

+1 for images plus.

Used it for raw DSLR images , Atik 16HR mono and Atik 460EX mono.

Works well and lots of options at the final combination - median , sigma clipped median , average etc.

Always worked perfectly.

John

Title: Re: 314EC and 383LC+/ color converting, stacking and processing
Post by: gljiva on December 06, 2012, 09:19:21 pm

Thanks for answer Joseph / John.
In the meantime I have been testing Nebulosity and Pixinsight and I think I will go with those two softwares.
Need to learn all over again. :-[

Attached my first ever proccesed picture under Nebulosity and Pixinsight.

The rest of details:
DATE AND TIME:
16.11.2012
EQUIPMENT:
SkyWatcher ED APO 80_600 Atik 383LC+
GUIDING:
Finder 8x50 / ALCCD5v / Mount CGM DX
EXPOSURES:
8x600; Dark 16x600; BIAS30x
SOFTWARE:
Artemis Capture_PHD Guiding_Nebulosity_Pixinsight

Title: Re: 314EC and 383LC+/ color converting, stacking and processing
Post by: JacobvonChorus on December 07, 2012, 03:03:36 am

I own Nebulosity and have used the Pixinsight trial (and am going to buy it soon) and have to say they are a great combination. Nebulosity does a great job with capture and pre-processing, never had a problem. For post-processing, the power of Pixinsight is great, though there is a learning curve.

Jacob