Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: Lenny on February 21, 2018, 01:52:39 am

Title: Camera drivers not loading after one use
Post by: Lenny on February 21, 2018, 01:52:39 am

Running Windows 10 Pro 64 bit.
 
I've got a 383L Mono and a 314L OSC.

I've installed 4.2.1.0 software and drivers.and the camera connects. Next time I go to start up the observatory computer they will not connect in Maxim. If I select Setup Camera, ASCOM , Advanced, Atik, the selection box for setting either the 383 or the 314 is blank. Only way to fix it is to delete the software in Windows, reinstall if and it will work again. Until the next time the computer is shutdown and restarted. Wash, rinse, and repeat. This has all transpired since the Great Windows 10 Update fiasco but this is on a new HP laptop purchased since that mess back in early January.

Title: Re: Camera drivers not loading after one use
Post by: Jumgyn on April 12, 2018, 02:20:04 am

It's happing to me too. I'm staing crazy about that.

Title: Re: Camera drivers not loading after one use
Post by: jmfdiver on May 08, 2018, 02:05:09 pm

This is happening to me too latest update of win 10 1803.
Jen

Title: Re: Camera drivers not loading after one use
Post by: murphyme on May 08, 2018, 07:43:02 pm

I used to have a similar issue with a 414-EX.

I solved it by making sure that the camera was powered before plugging it into the laptop.

Michael.

Title: Re: Camera drivers not loading after one use
Post by: kimmysawi on August 06, 2018, 12:01:55 pm

Quote from: murphyme on May 08, 2018, 07:43:02 pm

I used to have a similar issue with a 414-PhenQ (https://phenq-reviews.com/)EX.

I solved it by making sure that the camera was powered before plugging it into the laptop.

Michael.

This was only the best merchandise to equally determine things

Title: Re: Camera drivers not loading after one use
Post by: shailly778 on September 17, 2018, 12:44:36 pm

Quote from: murphyme on May 08, 2018, 07:43:02 pm

I used to have a similar issue with the Phallosan* (https://mensreviewzone.com/phallosan-forte-reviews/) . No gains and results yet.

Update: After 9 months finally I got some good results with 3 inches of gain. As per the suggestion by a veteran Phallosan user, (https://buffaloreport.com/phallosan-forte-review-results/)I changed my daily routine and got expected results.

I solved it by making sure that the extender device was powered before plugging it into the laptop.

Michael.

I am also having the same issue and not able to resolve. Help.

Title: Re: Camera drivers not loading after one use
Post by: JohnWick7 on October 03, 2018, 06:17:06 am

You share your knowledge.