Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => 3- and 4-Series Cameras => Topic started by: BigAl on September 25, 2020, 09:13:14 am

Title: Error 206 with Atik 383L camera and TSX after a few hours imaging.
Post by: BigAl on September 25, 2020, 09:13:14 am
Hi,
I've tried Atik support emails on this but no response as yet.
I’m running an Atik 383L+ using the latest Atik ASCOM driver in TSXpro 10.5.0 Build 12545.
I control my sessions using Voyager.
Over the past few nights after 3 – 4 hrs of successful imaging, although the camera is going through the motions of taking 10 minute subs, when it completes an exposure and tries to download and / or save I get

CameraShot Error Error = 206.

Even more annoyingly, the camera apparently continues to take the next subs but for this point on always gives the same error when trying to save.
Files are normally saved to the Local Hard Drive.
If I completely disconnect the Camera power down and Reconnect it functions normally.

USB cables are fine and have been changed just in case.

Software Bisque say this is not one of there errors and could be the ASCOM driver.

What could be going on please?
Thanks

Allan
Title: Re: Error 206 with Atik 383L camera and TSX after a few hours imaging.
Post by: BigAl on September 30, 2020, 12:11:06 pm
Any response form Atik?
It's still happening!
Software Bisque are ready to chase this but they need to know what the error means!

It's a bit poor that Atik do not reply to my direct support emails - any reason for this?

Here's hoping.
Allan
Title: Re: Error 206 with Atik 383L camera and TSX after a few hours imaging.
Post by: vince on September 30, 2020, 02:28:00 pm
Hello Allan,

Sorry about this, could I ask if you sent the message in by email or by using our webform as we do seem to be having a few email issues with the webform at the moment. Would it be possible for you to email us a screenshot showing the error code please? support@atik-cameras.com

Best regards
Vince