Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Software and Everything Else => Topic started by: jackyjoy123 on February 25, 2021, 02:19:12 pm

Title: ASCOM driver for ST4 port ?.
Post by: jackyjoy123 on February 25, 2021, 02:19:12 pm

Hello,


n the old Artemis CCD Yahoo group there is a message indicating that there is an ASCOM driver for using the ST4 guideport on the camera (in my case an Atik 16HR) when guiding via another camera.

Unfortunately, this group is now closed and only members can get access to the files, so I can't get that file.
Does anyone know of a source of the driver or another solution to allow me to guide via one camera whilst using the ST4 port on my Atik camera to guide?
FWIW I use PHD for guiding with a Meade DSI Pro as a guide camera.


thanks
jackyjoy

Title: Re: ASCOM driver for ST4 port ?.
Post by: idealisticcapture on January 21, 2022, 03:15:11 am

Quote from: jackyjoy123 on February 25, 2021, 02:19:12 pm

Hello,


n the old Artemis CCD Yahoo group there is a message indicating that there is an ASCOM driver for using the ST4 guideport on the camera (in my case an Atik 16HR) when guiding via another camera.

Unfortunately, this group is now closed and only members can get access to the files, so I can't get that file.
Does anyone know of a source of the driver or another solution to allow me to guide via one camera whilst using the ST4 port on my Atik camera to guide?
FWIW I use PHD for guiding with a Meade DSI Pro as a guide camera.


thanks
jackyjoy

I'm unable to get the file. Is there a source for the driver, or is there any option that will enable me to guide with one camera while utilizing the ST4 port on my Atik camera to guide with another camera?