Atik Cameras Forum

Support (Please note, this is primarily a user forum, for direct Atik support, please email support@atik-cameras.com) => Accessories => Topic started by: Duczmal on June 16, 2013, 08:32:25 pm

Title: unscrewing the 2" to M54 adapter from OAG
Post by: Duczmal on June 16, 2013, 08:32:25 pm

Hello,

I'm trying to unscrew the 2" to M54 adapter (part #5) from the OAG, but it is very tight. I'm wondering if it is glued to the Main body (part #6). I really can't remember if it was already attached to the main body when I bought the OAG. Any help appreciated.

Clear skies,
Luiz

Title: Re: unscrewing the 2" to M54 adapter from OAG
Post by: MikeM on June 18, 2013, 02:30:12 pm

It should not be glued to the main body (unless you bought it used and the previous owner glued it). You may try using a small
strap wrench which would remove it with no marks.

Title: Re: unscrewing the 2" to M54 adapter from OAG
Post by: Duczmal on June 18, 2013, 06:22:46 pm

Thanks Mike.

I bought it new. I will follow your suggestion, it seems a good try.

Clear Skies,
Luiz   

Title: Re: unscrewing the 2" to M54 adapter from OAG
Post by: Duczmal on June 18, 2013, 06:57:46 pm

Thanks Mike and Vince,

I managed to unscrew it, using a bit more force :)

Best Regards,
Luiz