ATIK 428 CCD to Nose

[Guy Walsh]

Hi

I bought an ATIK 428 OSC today from Ian King, I forgot to ask Ian for the CCD face to NOSE distance on the 428 OSC.

I'm hoping I can get an IDAS PII filter in 1.24  somewhere in the optical train, even better has the CCD window thread correct to take 1,25 flter?... now that would be a fantastic.. 

Cheers
Guy

[Konihlav]

Guy Walsh: http://www.teleskop-express.de/shop/product_info.php/language/en/info/p2165_Filterschublade-inkl--1-Einschub-fuer-1-25--Filter---kurzbauend.html

[riklaunim]

Or two Baader adapters for permanent solution - continuous female T2 with 1,25" thread and continuous male T2. You screw that to the camera T2 threaded and you can mount a 1,25" filter quite close to the sensor.

[Guy Walsh]

Guy Walsh: http://www.teleskop-express.de/shop/product_info.php/language/en/info/p2165_Filterschublade-inkl--1-Einschub-fuer-1-25--Filter---kurzbauend.html

Thanks but Ive got a manual ATik filter wheel which will have a Ha & IDAS 1.25

Or two Baader adapters for permanent solution - continuous female T2 with 1,25" thread and continuous male T2. You screw that to the camera T2 threaded and you can mount a 1,25" filter quite close to the sensor.

Thanks I think I should have explained more 

I was looking for this
http://agenaastro.com/blue-fireball-gender-changer-g-tm.html

Ian King has sorted this for me Top man... 


I still need to know what the CCD to nose distance is, I can then calculate to see if I can get an OAG between the filter wheel and my 300mm f/2.8 camera lens.

Here is a post under my SGL name Coco:
http://stargazerslounge.com/diy-astronomer/146395-eos-lens-filter-wheel.html

I want to replicate the same isea with the 428, the CCD distance on my 383 was 17mm and the 314L a generouse 11mm  was hoping someone from ATIK would give me the info