Atik Cameras

Author Topic: Processing mono CCD subs?  (Read 30019 times)

bwa

  • Sr. Member
  • ****
  • Posts: 298
Processing mono CCD subs?
« on: February 03, 2012, 01:25:22 AM »
So, what is everyone's favorite software for processing LRGB and narrowband (Ha,
Hb, Oiii and Sii) subs?

I'm going to wade into this next week with the delivery of my 1st mono CCD, an ATIK 428Ex.

To this point I have used a couple of DSLR's, a QHY8 and a QHY9C, as well as two astro-video cameras BUT never anything requiring filters to get a color image.

My software expertise (if I dare claim this) is ImagesPlus, Registax, Deep Sky Stacker and Photoshop.

I've heard a number of good things about PixInsight and do have the LE release but have never tried it?

bwa

Lex

  • Full Member
  • ***
  • Posts: 244
  • We do it at night...
Re: Processing mono CCD subs?
« Reply #1 on: February 10, 2012, 08:16:49 PM »
Hi,

Go for PI, this is really THE software for processing! I used PS and even use PI now for processing my normal photos!!
You will need some time to get into it but it's worth the efforts, really!!!

Best

Lex
CGEM, C11, TS Carbon Apo Triplet 90/600, TS Carbon UNC 254/1250, Atik 383l+, EFW2,
TSOAG, Lodestar....

Merlin66

  • Newbie
  • *
  • Posts: 20
Re: Processing mono CCD subs?
« Reply #2 on: February 15, 2012, 03:59:46 PM »
I've been using AstroArt for years.
Very under-rated for what it does. It controls all my cameras for spectroscopy.
Just works!
recommended.

Lex

  • Full Member
  • ***
  • Posts: 244
  • We do it at night...
Re: Processing mono CCD subs?
« Reply #3 on: March 03, 2012, 08:51:18 PM »
Hi,

I always used Maxim, but after some problems i switched to Astroart..
Just a question, does it need a lot of RAM to work in a satisfying maner?
CGEM, C11, TS Carbon Apo Triplet 90/600, TS Carbon UNC 254/1250, Atik 383l+, EFW2,
TSOAG, Lodestar....

arenosa

  • Newbie
  • *
  • Posts: 8
Re: Processing mono CCD subs?
« Reply #4 on: May 24, 2017, 09:30:15 PM »
Hi,

Go for PI, this is really THE software for processing! I used PS and even use PI now for processing my normal photos!!
You will need some time to get into it but it's worth the efforts, really!!!

Best

Lex

Sorry, but PI stands for...

bwa

  • Sr. Member
  • ****
  • Posts: 298
Re: Processing mono CCD subs?
« Reply #5 on: May 29, 2017, 02:06:42 AM »
Hi,

Go for PI, this is really THE software for processing! I used PS and even use PI now for processing my normal photos!!
You will need some time to get into it but it's worth the efforts, really!!!

Best

Lex

Sorry, but PI stands for...
PI === PixInsight

bwa

harriscmiv

  • Newbie
  • *
  • Posts: 34
  • Learning as we go
Re: Processing mono CCD subs?
« Reply #6 on: May 31, 2017, 08:40:24 PM »
Merlin and Lex,
if i may branch off a bit,..delving into AA for all my worth and will be on the lookout for your input on the site.  I have a few posts so far and looking forward to many more.
thx
charles
Charles H.
8" Edge
3" ES Refractor
Canon Rebel T5
Atik One 9.0
Skyshed Observatory

dpaul

  • Full Member
  • ***
  • Posts: 134
Re: Processing mono CCD subs?
« Reply #7 on: May 31, 2018, 10:23:21 AM »
BWA

PI (Pixinsight) is amazing and it was developed by astronomers for astronomers - I do everything with PI.
Yes its a learning curve but well worth it.

Dave