Atik Cameras

Author Topic: NGC7000 - Atik 383L mono  (Read 13295 times)

frazzles114

  • Newbie
  • *
  • Posts: 10
NGC7000 - Atik 383L mono
« on: July 21, 2013, 06:59:23 PM »
Hi All,

I figured I also owed the forum my first RGB after a couple of Ha only pics that I didn't post. Setup took a while as clouds had been with us for ever and I had an equipment change too.

This was 9X4 mins Ha as red channel, 8x4 mins green and 8x4 mins blue.
Orion ED80 triplet CF
Miniguider
NEQ6
Atik 383L mono

Processed in PixInsight with no calibration frames.
50% jpeg quality to fit the 600k limit.
« Last Edit: July 21, 2013, 07:02:49 PM by frazzles114 »

MikeM

  • Full Member
  • ***
  • Posts: 158
    • myastroimages.com
Re: NGC7000 - Atik 383L mono
« Reply #1 on: July 22, 2013, 01:57:45 PM »
Very nice result particularly for the short amount of time spent.
Clear Skies!!
Mike

FSQ106N - AT8RC
G-11

hamish

  • Newbie
  • *
  • Posts: 1
Re: NGC7000 - Atik 383L mono
« Reply #2 on: September 26, 2013, 07:03:17 AM »
Hi, May I know what filter wheel and the filter size you are using on your ED80 Triplet? DO you have any vignatting at the corners. At what focal ratio was the image taken?

frazzles114

  • Newbie
  • *
  • Posts: 10
Re: NGC7000 - Atik 383L mono
« Reply #3 on: September 26, 2013, 10:05:40 PM »
Hi Hamish,

I use 2 inch Baader filters on the Atik EFW2 and the vignetting will take a better eye than mine to assess. To be honest though that is the very reason I went full 2 inch filters to avoid that problem as much as possible.

It was at F6.

Fraz.