50 Bias

[GH-ATIK]

Hi ,
Today I produced 50 bias with 383L+ at -15°C with 13,5 V.

The last bias was completed , after that, the an electronical part overheated and the camera is damaged.

The camera should withstand this procedure , or is it to much ?

are 13,5V in workspace?

I think ,  I must wait 3-4 month for repairing.

http://www.gerhard-henning.de/Astro%20-%20signiert/atik.JPG

knows anybody this part ?

Gerhard

[MikeM]

I suggest you contact Atik support to see what they may be able to do..  Support@Atik-Cameras.com

I say this because I use a Pyramid 13.8v 5amp regulated power supply with no issues.

[NickK]

I suggest you contact Atik support to see what they may be able to do..  Support@Atik-Cameras.com

I say this because I use a Pyramid 13.8v 5amp regulated power supply with no issues.

I use a Maplins 13.8V 7A power supply and also not had an issue. The 383L needs a PSU to supply at least 2.5A (according to the manual).

When I stepped on the USB cable and destroyed the USB socket in the 383L, it was fixed and back in my hands in a day turn around..

[GH-ATIK]

Thanks ,
I used a power-supply with 7A and adjustable voltage from 11 to 15 V.
In use, I adjusted 13,5V.

Gerhard

[Chris]

Why on earth not contact Atik support?   They are the only people who can help. We can't help you.

The only reason I can think of getting this fixed by Atik taking three months is if you wait a couple of months before contacting them.

Chris

[GH-ATIK]

I´m in contact with service-team.

Gerhard