Atik Cameras

Author Topic: 383L+C Andromeda Core  (Read 14334 times)

jblockyou

  • Newbie
  • *
  • Posts: 10
383L+C Andromeda Core
« on: July 24, 2012, 08:39:24 PM »
First light with my new Atik 383+LC.
Image consists of [5] ten minute exposures with camera cooled to 0'C shot using my 10" F/4 newtonian reflector. Since this picture was taken I have worked out my coma problem by adjusting the spacing on my MPCC.

Steve

  • Atik Staff
  • Full Member
  • *****
  • Posts: 160
Re: 383L+C Andromeda Core
« Reply #1 on: July 25, 2012, 01:27:30 PM »
Hi,

Nice picture,  I like the detail and colour balance. 
Cheers
Steve

geoshare

  • Newbie
  • *
  • Posts: 46
Re: 383L+C Andromeda Core
« Reply #2 on: July 30, 2012, 03:47:54 AM »
Nice image....curious what mount and tracking/autoguiding you are using?
Robert
Tele Vue 101 is
ATIK 383L
EFW2

jblockyou

  • Newbie
  • *
  • Posts: 10
Re: 383L+C Andromeda Core
« Reply #3 on: July 30, 2012, 02:05:03 PM »
I'm using a Losmandy G11 with a Orion Starshoot Autoguider and PHD guiding software.
Also I used a Baader MPCC coma corrector and a IDAS LPS filter. I have had trouble getting the spacing correct on the MPCC. The company says it should be 55mm from the camera chip but when I space it at 55mm the coma is still around the outside of the field. I tried 50mm and it was worse and then I tried 60mm and the coma dissapeared. This shot was taken before I found the correct spacing.