Atik Cameras

Author Topic: exposure and noise reduction  (Read 25827 times)

theoatc

  • Newbie
  • *
  • Posts: 37
exposure and noise reduction
« on: October 27, 2018, 10:54:04 AM »
Hello , i've owned the infinity for two years now. Everything is excellent , excepts the cooling part . During long hot summer nights  here in Greece , even live viewing is a problem. Hot pixels everywhere ,no matter software removes them . So i decided to give a try to cool it . No peltier ,just a fan ,around 13mm blade ,attached to the rear of the camera  ,at 5mm distance. I hope it will helps.
Since we don't have clear skies these days , tests will be run indoors. I ll keep you posted the next weeks or so with pics of the results.
Although i do have a question for atik . Supposedly , i achieve some temperature decrease , how safe is to exceed 2 min exposure barrier ?
I mean there is an option in the latest software to exceed the 2 min . Is it safe to set infinity ' s exposure time to 3 or 4 min?
Or it will harm anything within it?
i believe that noise will be horrible ,but assuming that there will be better cooling , i can even use dark frames in post processing , is it recommended?
i don't want to burn any circuit.
thanks
« Last Edit: November 09, 2018, 10:18:52 AM by theoatc »

CraigG

  • Full Member
  • ***
  • Posts: 189
Re: exposure
« Reply #1 on: October 28, 2018, 10:56:02 AM »
We'll be interested to hear how your added fan performs! Since you said that you attached the fan directly to the camera, I'm wondering how vibrations from the fan will affect the images? Best of luck!
-Craig

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure
« Reply #2 on: November 01, 2018, 10:09:02 AM »
We'll be interested to hear how your added fan performs! Since you said that you attached the fan directly to the camera, I'm wondering how vibrations from the fan will affect the images? Best of luck!
-Craig
i will insert some sort of rubber pad , btw fan and camera, to absorb any vibrations. Hope it will works. But if any developer is reading this ,i want to know if over 2 min exp ,can cause any harm to the sensor?

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure
« Reply #3 on: November 07, 2018, 02:11:18 PM »
Since no one from the staff is interesting in answering my question , i experimented on my risk. The attached pic is part of my mosaic plan of m31. The exposure was set to 100sec ,50 frames. I used my attached fan which helped a lot with noise reduction (no vibrations whatsoever, since i used soft pads). When i added same  darks and used the dither command of the phd2 ,result is almost noise free. Original size after process ,is 7 mb. Shrinking it ,loses detail , but for a non cooled camera is awesome result. This camera can do a lot with the right tools, EAA and casual astrophotography...

CraigG

  • Full Member
  • ***
  • Posts: 189
Re: exposure
« Reply #4 on: November 09, 2018, 02:09:46 AM »
Very nice! Looks like your fan addition worked well. Thanks for sharing!

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure and noise reduction
« Reply #5 on: November 22, 2018, 11:48:24 PM »
Is there anyone reading this forum in 2018????
Anyway  , i ll keep posting my adventures with my infinity , for whoever cares.
Two panel mosaic of ic 1396 . Cooling fan on , high dither in phd2 , some tricks in pixinsight , goodbye hot pixels and a very difficult target pops up. I ll give it a try with the Ha filtrer asap ,and i ll combine images for a better result. Wish i 'd owned an O2 filter ,this is an excellent target for oxygen filters.This was taken from the centre of my city . Red zone...
« Last Edit: November 22, 2018, 11:54:09 PM by theoatc »

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure and noise reduction
« Reply #6 on: January 03, 2019, 11:32:35 AM »
my atik infinity color journey continues , balcony astrophotography .from a red /orange  zone.
Ha baader filter used in both pics . Each pics took almost 18 hours of data to complete. Images are compressed to jpg and reduced to size ,so they can be uploaded here.No1 is IC1396B-elephant's trunk nebula.Composition of 4 panels
« Last Edit: January 07, 2019, 10:16:47 AM by theoatc »

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure and noise reduction
« Reply #7 on: January 03, 2019, 11:33:58 AM »
and the 2nd (ic 1848 -soul nebula).Composition of 3 panels
« Last Edit: January 03, 2019, 11:36:25 AM by theoatc »

CraigG

  • Full Member
  • ***
  • Posts: 189
Re: exposure and noise reduction
« Reply #8 on: January 03, 2019, 03:17:48 PM »
theoatc-

Nice work! You're a patient person to process 18 hours of data from your Infinity. Keep it up!
-Craig

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure and noise reduction
« Reply #9 on: January 03, 2019, 04:24:10 PM »
theoatc-

Nice work! You're a patient person to process 18 hours of data from your Infinity. Keep it up!
-Craig
Really love your comments CraigG. Really encouraging. I can't afford at the moment to buy a new ccd or cmos ,so i take the most of infinity. And as you can see ,it has a lot to give .Besides, i really ,really ,enjoy it....
« Last Edit: January 03, 2019, 05:23:54 PM by theoatc »

JimH123

  • Jr. Member
  • **
  • Posts: 57
Re: exposure and noise reduction
« Reply #10 on: February 01, 2019, 12:10:05 AM »
Can you post a picture of your fan mounted on the infinity?  And what fan are you using.  Different fans have wildly differing amounts of vibration.

theoatc

  • Newbie
  • *
  • Posts: 37
Re: exposure and noise reduction
« Reply #11 on: February 02, 2019, 02:45:26 PM »
Can you post a picture of your fan mounted on the infinity?  And what fan are you using.  Different fans have wildly differing amounts of vibration.

I will. As soon as I set up. We have really bad weather down here

mopa9000

  • Newbie
  • *
  • Posts: 2
Re: exposure and noise reduction
« Reply #12 on: May 28, 2019, 10:37:51 PM »
my atik infinity color journey continues , balcony astrophotography .from a red /orange  zone.
Ha baader filter used in both pics . Each pics took almost 18 hours of data to complete. Images are compressed to jpg and reduced to size ,so they can be uploaded here.No1 is IC1396B-elephant's trunk nebula.Composition of 4 panelsBrazzers Youporn Xhamster

Is there anyone reading this forum in 2018????
Anyway  , i ll keep posting my adventures with my infinity , for whoever cares.
Two panel mosaic of ic 1396 . Cooling fan on , high dither in phd2 , some tricks in pixinsight , goodbye hot pixels and a very difficult target pops up. I ll give it a try with the Ha filtrer asap ,and i ll combine images for a better result. Wish i 'd owned an O2 filter ,this is an excellent target for oxygen filters.This was taken from the centre of my city . Red zone...
« Last Edit: May 30, 2019, 07:55:45 PM by mopa9000 »

vince

  • Atik Staff
  • Sr. Member
  • *****
  • Posts: 283
Re: exposure and noise reduction
« Reply #13 on: May 29, 2019, 12:41:59 PM »
Hi all,

Apologies that no one from Atik hasn't commented on this! Direct questions to us are best sent to support@atik-cameras.com where we can normally answer within 24 hrs.

This is a great idea and the images are excellent! You won't harm the camera with exposure length, you will only be limited by the amount of noise in the image.

Best regards
Vince

Max2206

  • Newbie
  • *
  • Posts: 2
Re: exposure and noise reduction
« Reply #14 on: January 21, 2022, 12:33:28 AM »
I made myself for my Atik Infinity Color a Fanmount that hangs on the camera.
So i do not modify the camera, a non intrusive mod.
Between the 3D printed backplate an the fan a rubber pads and the hooks that attach to the camera have a small protection anti-vibration layer.

I attached a photo of the mod

/\/\ax2206

« Last Edit: January 21, 2022, 12:37:44 AM by Max2206 »