Atik Cameras

Author Topic: KAF 16200  (Read 26560 times)

aruangra

  • Newbie
  • *
  • Posts: 1
Re: KAF 16200
« Reply #30 on: November 15, 2016, 06:57:32 pm »
Does the camera use the Class 1 or Class 2 CCD chip? And how does the camera deal with moisture in the chamber? Argon-purged? Desiccant tube? Thank you.

Anat

rpineau

  • Newbie
  • *
  • Posts: 12
    • RTI-Zone
Re: KAF 16200
« Reply #31 on: November 15, 2016, 08:43:58 pm »
Hi Anat.
From this page : http://www.atik-cameras.com/product/atik-16200-coming-soon/
The Atik 16200 comes with a class II sensor fitted as standard
The CCD is housed in a sealed, argon-purged chamber to create a dry, condensation free environment.

Regards, Rodolphe

P e t e r

  • Newbie
  • *
  • Posts: 3
Re: KAF 16200
« Reply #32 on: December 09, 2016, 10:52:41 am »
Hello Jo,

Looking at the spec. I see you have the following;
Dark Current: >0.25 electrons/second at 0°C

Is this correct as other manufacturers using the same KAF 16200 have quoted a Dark Current: >0.1 electrons/second at 0°C

Hope you can clear this up as I thought the Dark Current was always specific to the actual model of sensor being used?


Regards, Peter

Steve

  • Atik Staff
  • Full Member
  • *****
  • Posts: 160
Re: KAF 16200
« Reply #33 on: December 16, 2016, 12:16:16 pm »
Hello,

Yes dark current is specific to the model of the sensor.   We will firm our value up as we get a larger number though production.  But the figure is just due to the cooling and sensor. 
Best
Steve

rpineau

  • Newbie
  • *
  • Posts: 12
    • RTI-Zone
Re: KAF 16200
« Reply #34 on: January 09, 2017, 05:13:01 pm »
I hope you guys had  a good end of year holiday break.
Is there any update on the availability date of the camera ?
Thanks, Rodolphe

Jo

  • Atik Staff
  • Sr. Member
  • *****
  • Posts: 264
Re: KAF 16200
« Reply #35 on: January 12, 2017, 09:52:20 am »
Hi Rodolphe,

Thanks, I hope you did too!

They are on the production line as we speak so I'd expect to see them shipping to dealers very soon! Though in terms of actual availability, it might be best to check with the dealers themselves. We've had an unexpectedly large number of back orders, but we don't always know whether these are for their stock or to fulfil existing orders.

I hope that helps!
Jo

rpineau

  • Newbie
  • *
  • Posts: 12
    • RTI-Zone
Re: KAF 16200
« Reply #36 on: January 12, 2017, 03:25:39 pm »
Thanks Jo
I haven't ordered mine as my usual dealers didn't have a date. May be I should pre-order to be sure to get one.
Regards, Rodolphe

rpineau

  • Newbie
  • *
  • Posts: 12
    • RTI-Zone
Re: KAF 16200
« Reply #37 on: January 12, 2017, 10:37:59 pm »
Camera ordered (from Highpoint Scientific).
:)

CCD_Stefan

  • Newbie
  • *
  • Posts: 13
Re: KAF 16200
« Reply #38 on: February 24, 2017, 07:37:33 am »
Hello, when is the delivery date now? It is always moved.
Stefan

rpineau

  • Newbie
  • *
  • Posts: 12
    • RTI-Zone
Re: KAF 16200
« Reply #39 on: March 05, 2017, 06:57:21 pm »
Any update on the availability date (mine is ordered via my US reseller .. so I'm hoping soon :D ).
Thanks
Rodolphe

subzero

  • Newbie
  • *
  • Posts: 1
Re: KAF 16200
« Reply #40 on: March 15, 2017, 05:38:47 pm »
The camera shares the low read noise digitisation circuits of our 3 and 4 series cameras.  Download time is approx 16 seconds.
Best
Steve

Will it be possible to select a lower (than normal) digitization speed to improve read noise?

There is, umm, another manufacturer who manages to get the read noise down to 6e- by lowering
the CCD read speed to 2MHz. Of course it depends also on AD and amplifiers.

That would be awesome.  I`m itching to buy this camera.


Larry